Iron on High Visibility Reflective Heat Transfer Tape

Attachment Type: Iron On or Heat Transfer Daytime Color: silver Backing fabric: PET film and hot melt adhesive Reflective coefficient: ＞420 Home Wash Cycles: Up to 50 cycles @60°C (140°F), depends on the condition of substrates and heat transfer operations. Width: up to 105cm, all sizes available Certification: ANSI/ISEA 107-2015 Application: suitable for anti-light heat on non-elastic fabrics such as polyester and knitting HOW TO APPLY: Cut the iron on / heat transfer reflective tape to desired length. Set the heat temperature of iron at about 120*C Place the tape by adhesive side down on the fabric. Put the iron on the tape and move it along the tape pressing firmly. you need 15-30 seconds to let the tape be attached to the fabric. Wait for 10-15 seconds to let it cool. Carefully peel off the transparent film from the applied reflective tape. Cover attached reflective tape with a piece of cloth and iron on for a 2-3 seconds. Remove cloth and admire your work!! Always remember, IF IN DOUBT, DO A TRYOUT with a 2” x 1” size tape on a scrap piece of fabric