Greenworks POWERALL 24V Cordless 18 GA Brad Nailer Kit with 2.0Ah Battery and Charger

Hello MJMfXMike. We appreciate you taking the time to review this product. We are sorry to hear that you are not completely satisfied with this unit’s weight and the issue you have experience while using this tool. With the 2.0AH (1.08 lbs.) battery installed; this unit weighs 6.95 lbs. in total. Weight (without battery pack) 5.9 lbs. (2.68 kg). Below we have included some operation use in the hopes it will help resolve the issue you are having. Single firing mode: Single firing mode provides the most accurate nail placement. 1. Push the single / contact firing knob to position T. 2. Depress the safety contact pin against the work surface. 3. Squeeze the trigger to fire the nail. 4. Release the trigger and safety contact pin after firing. Contact firing mode: Contact firing mode provides the convenient and fast nail placement. 1. Push the single / contact firing knob to position TTT. 2. Squeeze and hold the trigger all the time. 3. Depress the safety contact pin against the work surface. 4. Release the trigger and safety contact pin after firing. *Keep squeezing the trigger all the time during the safety contact pin is being depressed time by time. To remove a jammed nail. 1. Remove the battery pack from the machine. 2. Open the magazine and remove the nails in channel. 3. Pull up the jam release latch. 4. Remove the jammed nail. 5. Close the jam release latch. 6. Reload the nails and close the magazine The battery LED indicator will illuminate in specific order to communicate the current machine status. They are as follows: Red light flashes. The nails are jammed. Red light goes on all time. Low battery. Green light flashes. Overheat protection. Green light goes on all time No nails, the machine in dry fire protection. We hope with these tips they will assist in a more enjoyable user experience. Should they not yield results contact Greenworks by Live Chat on www.greenworkstools.com or by phone on 1-888-909-6757.